 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AC-DC 20 Watts ECP20 Series * * * * * * * Low Profile, 0.73" Class II Construction PCB Mounting xppower.com Single Outputs from 3.3 to 48 V Dual Outputs from 12 to 24 V <0.3 W No Load Input Power Peak Load Capability Specification Input Input Voltage Input Frequency Input Current Inrush Current Power Factor No Load Input Power * * * * * * 85-264 VAC 47-63 Hz 0.5 A max at 115 VAC 40 A max at 230 VAC Conforms to EN61000-3-2, Class A <0.3 W General Efficiency Isolation Switching Frequency * See tables * 3000 VAC Input to Output * 65 kHz typical Environmental Operating Temperature * 0 C to +70 C, derate from 100% load at 50 C to 50% load at 70 C Cooling * Natural convection Operating Humidity * 5% to 95% RH, non condensing Storage Temperature * -40 C to +85 C Shock * 30g, half sine, 6 axis Vibration * 5-50 Hz, 2g 15 mins/sweep, 30 mins for each of 3 axes Output Output Voltage Initial Set Accuracy Minimum Load Start Up Delay Start Up Rise Time Hold Up Time Line Regulation Load Regulation Transient Response * * * * * * * * * See table 1% at 60% load No minimum load required 1.3 s max 15 ms typical 10 ms min at full load & 115 VAC 0.5% max 1.0% max 4% max deviation, recovering to less than 1% within 500us for 50% step load change at 1 A/s 3.3 & 5 V versions: 50 mV, 1% for others measured with 20 MHz BW 110-140% of nominal output voltage 150-180% of full load current Trip and restart (Hiccup mode) 0.02%/C max EMC & Safety Emissions Harmonic Currents Voltage Flicker ESD Immunity Radiated Immunity EFT / Burst Surge Conducted Immunity Dips & Interruptions * * * * * * * * * EN55022, level B conducted & radiated EN61000-3-2, class A EN61000-3-3 EN61000-4-2, 4 kV indirect contact, Perf Criteria A EN61000-4-3, 3 V/m, Perf Criteria A EN61000-4-4, level 2 Perf Criteria A EN61000-4-5, level 2 Perf Criteria A EN61000-4-6, 3 V Perf Criteria A EN61000-4-11, 70% UT 10ms, 40% UT 100ms, <5% UT 5000ms, Perf Criteria A, B, B EN60950, cUL60950, IEC60950-1 Ripple & Noise Overvoltage Protection Overload Protection Short Circuit Protection Temperature Coefficient * * * * * Safety Approvals * AC-DC Models and Ratings Output Power 13.2 W 20 W 20 W 20 W 20 W 20 W 20 W 20 W 20 W 20 W 20 W Notes 1. Peak load lasting <30 s with a maxiumum duty cycle of 10%, average output power not to exceed nominal. ECP20 Output 2 Peak (1) Output 1 Voltage 3.3 VDC 5.0 VDC 9.0 VDC 12.0 VDC 15.0 VDC 24.0 VDC 30.0 VDC 48.0 VDC +12.0 VDC +15.0 VDC +24.0 VDC Current 4.0 A 4.0 A 2.23 A 1.67 A 1.34 A 0.84 A 0.67 A 0.42 A 0.84 A 0.67 A 0.42 A Voltage 5.20 A 5.20 A 2.90 A 2.17 A 1.74 A 1.09 A 0.87 A 0.55 A 1.09 A 0.87 A 0.55 A -12.0 VDC -15.0 VDC -24.0 VDC Current Peak (1) Efficiency 75% 80% 82% 84% 84% 85% 86% 87% Model Number(2) ECP20US03 ECP20US05 ECP20US09 ECP20US12 ECP20US15 ECP20US24 ECP20US30 ECP20US48 ECP20UD12 ECP20UD15 ECP20UD24 0.84 A 0.67 A 0.42 A 1.09 A 0.97 A 0.55 A 83% 84% 84% Mechanical Details 3 0.45 (11.50) 1.57 (40) 0.157 (4.0) 1 4 0.79 (20) 0.45 (11.50) 5 0.1 (2.5) 2.44 (62) 2.64 (67) 2 0.492 (12.50) 0.06 (1.60) o 0.080 (o2.00) o 0.040 (o1.00) 0.15 (3.80) Pin 1 2 3 4 5 ECP20US Line Neutral Output -VE Not Connected Output +VE ECP20UD Line Neutral Output -VE Common Output +VE Notes 1. All measurements are in inches (mm). 2. Weight: 40g approx. 0.10 (2.60) 0.12 (3) 0.55 (14) 27-Nov-08 |
Price & Availability of ECP20UD12
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |